Kemppi Pro Evolution 3200 Operation Instruction Manual

Also see for Pro 5200 EVOLUTION: Operation instructions

Contents

Kemppi Pro Evolution 3200 Operation Instruction Manual Manual pdf 10 page image

10 – Kemppi pro evolution 300, 400, 500, 300 mvu, 400 mvu, 500 mvu / 0617 © Kemppi oy9-90I 2tU 2max.I 24.1.2. Control of ignition pulse current (PX)Display 0 corresponds to factory set up of ignition pulse. Number of ignition pulsesd epends onelectrode type and diameter which are used. Ignition pulse changes with set value of weldingcurrent in such a way that at low values ignition pulse is low and short and at high values it ishigher and longer.Low, short ignition pulse. Object e.g. small stainless electrodes.4.1.3. Meter display (PL, PX)Voltage meter shows machine’s terminal voltage which is voltage between connectors X11/X12and X13.Accurancy of current true value in respect to real value is ±2,5 %, ±2 A.Accurancy of voltage true value in respect to real value is ±2,5 %, ±0,2 V.Depending on welding cable legth and copper cross section, real arc voltage and meter displaymight differ main volts from each other. Error will incease when current is growing. See table inparagraph ”Welding and earth cables”, page 8.In current measurement the same error won’t appear.4.1.4. Operation mede selection (PX)Normal MMA weldingIn normal MMA welding there are constant current characteristics in the machine. The machineis trying to keep welding current value regardless of arc length changes.0 = factory set upFactory set up. Object e.g. basic electrodes.High, long ignition pulse. Object e.g. high efficiency electrodes.U 2=20V+0,04xI2norm linestatically constant current