Kemppi Promig 300 Operation Instructions Manual

PROMIG 200, PROMIG 300 / 0537 – 3© KEMPPI OYPromig 200 and Promig 300 are mobile wire feeders designed for dock yards and heavy metalindustry. PRO multi function power sources are used as power soures for Promig wire feeders.Due to operational properties and mechanical durability of wire feeders, Promig 200 and 300units are very suitable for flux-cored wire welding with long intermediate cables. Operationsof wire feed unit are controlled and adjusted with a microprocessor and a tacho generator ofwire feed speed. Promig 200 and 300 are based on same technical basic solutions, the unitsare different from each other in the first place in respect of size or filler wire reel. Promig 200is designed to be used with filler wire reel of max 200 mm (5kg), whereas Promig 300 is forreels of max 300 mm (20 kg).These operation instructions handle Promig 200 and Promig 300 wire feed units, assembly,installation and operation functions of MIG-system.This equipment’s electromagnetic compatibility (EMC) is designed for use in an indust-rial environment. Class A equipment is not intended for use in residential location wherethe electrical power is provided by the public low-voltage supply system.1.2.1. Main functionsMain switchAdjustment of welding voltage (MIG/MAG) and current (MMA)Adjustment of wire feed speedSelection of welding method MIG/MAG / MMARegulator/meter for shielding gas flowControl of shielding gas1. PREFACE1.1. INTRODUCTIONCongratulations on having purchased this product. Properly installed Kemppi products shouldprove to be productive machines requiring maintenance at only regular intervals. This manualis arranged to give you a good understanding of the equipment and its safe operation. It alsocontains maintenance information and technical specifications. Read this manual from front toback before installing, operating or maintaining the equipment for the first time. For furtherinformation on Kemppi products please contact us or your nearest Kemppi distributor.The specifications and designs presented in this manual are subject to change without priornotice.In this document, for danger to life or injury the following symbol is used:Read the warning texts carefully and follow the instructions. Please also study the Operationsafety instructions and respect them when installing, operating and servicing the machine.1.2. PRODUCT INTRODUCTION