Review this table to find do-it-yourself solutions for minor performance problems_ Any serviceneeded_ other than maintenance described in thts Use & Care Guide, should be performedby a Sears or other qualified service agent°WARNINGDisconnectelectrical supply before performingmalnlenanceto the vacuum cleaner.Failureto do so couldresult in electrical shockor personalinjury.Vacuum cleaner 1, Unplugged at wall outret I_ Plug tn firmly, select thewon't run° desired setting on the touch2o Tripped circuit breaker/blown 2_fuse at household service panel3, Thermal protector tripped° 3o4o Defective wail outlet, 4.I. Full or clogged dust cup. 1o2, Wrong pile height setting 2,3. Worn agitator. 3,4. Clogged nozzle 4,5, Clogged hose_ 5_6. Ho_e in hose° 6.7. Hose not inserted fully° Z8, Motor protection system 8,activated,9, Dirty filter(s) 9.IOn Dust cup not assembledcorrectly.Vacuum cleaner picks 1, Wrong pile height sotting_ 1o Adjust setting,up moveable rugs orpushes too hard.Agitator does not 1o Handle in full upright position,turn,2, Agtlator overload tripped.3, Thermal protector tripped.Poor job of dirtplck_up_Airflow restrictedwith attachment use;sound changes,contmlReset circuit breaker orreplace fuse,Aliow vacuum cleaner to cool40-50 minutesCheck with a good appliance orlamp_ Have outlet properlyserviced,Empty dust cup,Adjust setting,Replace agitator.See CLOG REMOVALsecffon of this Use & Care Guide.Check for clogs_Replace hose,Insert hose fullyCheck for elogs_Clean or change primary filterand/or change exhaust filter.10. Remove dust cup and reinstall,Io Move handle from uprightposition2_ Reset agltator overloadprotector,3. Albw vacuum cleaner to cool40-50 minutes,1, Attachment use restricts air flowo 1. Check ATTACHMENTS for fuzz,lint, pet hair or other debris.2o New carpet fuzz clogged air 2_ Check for clogs and ctean hose_path- See CLOG RE_clOVAL sectionof this Use & Care Guide.Vacuum Cleaner Help Line:1-877-531-73218.00am-5:OOpm EST,M-F(U.SoA. andCanada)24