TO STORE ATTACHMENTSRemove dusting brush or combinationbrush, Snap into appropriate storage loca-tiomRemove crevice toolfrom lhe wand by twist-ing,,Lay aside.Remove the extension wand from the hose,Twist the wand to the left and pull from thehose end.,Lock LockingRingUpperWandUnlock the wand by turningthe wand lock-ing ring to the UNLOCK position,Slide the lower wand into the upper wand,Turn the wand locking ring !o the LOCKpositionPlace the crevice tool down into the com-pressed wand. Snap intolhe appropriatestorage location,,Reinsert the hose fully intothe opening onthe lowerbody from which it was removedPress firmly to assure connectionCAUTIONDO NOT pull the vacuum cleaneraround the room by the hose,Property damage could result.EXTENSION HOSESOME MODELSSome models include an extra hose whichconnects to the stretch hose on the vacuumfor a longercleaning reach.Unit Hose A_, Extension HoseInserl the two labs on the end of theextension hose intothe two "J" shaped slotson the unit hose and twistto connecLAll attachments and the telescoping wandcan be attached tothe open end of thehose.FLOOR BRUSH AND WANDSOME MODELSSome models have an extra brush and wandfor cleaningbare floors, Twist one end of theadaptor into the floor brush and the otherend intothe straight wand, Connect thestraight wand to the telescopic wand andthen to the vacuum hose or extension hose.Floor Brush _wo°,J Ao°pCAUTIONWhen using the regular hose or wflhthe extension hose attached, thecleaner should be on a solid surfaceon the same level or below the levelof the user's feet, DO NOT use thehoses when the cleaner is above thelevel of the user's feet. i_ll..............ATTACHMENTDUSTING BRUSH _CREVICE TOOLCOMBINATION BRUSH _*Alwaysclean altachrnentsbeforeustn,CLEANING AREABetweenFurniture* Cushions*XX XXon fabrics.Drapes* StairsXXX XWallsX10