TO CLEAN AGITATORNOTE: In order to keep cleaning elftclencyhigh and to prevent damage to your vacu_urn, _tor must beThe agitator must be cleaned according tothe following schedule:Vacuum Use CleanHEAVY every week(useddeity)MODERATE every month(used 2-3 times/week)LIGHT every 2 months(used 1 time/week)Remove ant dirt or derbris in the belt patharea or in the agitator area,Exploded View - AgitatorAssemblyC_p Agtlator Unit I "Bolt _ndPu!ley CapCarefully remove_.__ any string ordebris located onthe agitator, endcaps, or agitatorshaft..End CapReplace the end caps, See the explodedview for correct assembly.TO REPLACE BELTMake sure that the carpet/bare floorselector is in the carpet position.Loop the new bell on the motor shaft.Molorw CerpeUBaro FloorPulley Bell Selector ShaftBELT ROUTINGCorrect Routing of Belt(Selector tn CarpefPosftlon)Carpet/Bare Floor ShaftSelec tot ShaftIncorrect Routing of Belt(Belt on Selector Shall)Carpet/Bare F/oor ShaftSelector ShallIncorrect Routing of Belt(Selector in Bare Floor Posfffon)Agftalor Belt CarpeUBere FloorSeleclor Shaft17