Kenwood CD-206 Instruction Manual

Also see for CD-203: Instruction manual Instruction manual Instruction manual Connection guide Connection guide

Kenwood CD-206 Instruction Manual Manual pdf 14 page image

CD-206/204/203/DPF-R6010/R4010/R3010 (En)14GP 0M 1 1D T ON 2. 5GP 0M 1 1D T ON 2. 5«GP 0M 1 BA DC FE HGProgrammed play (PGM mode)Use the following procedure to program desired tracks in adesired order. (up to 32 tracks)÷ Load a disc in the CD player.Press so that the “PGM” indicator lights.1PreparationDo this operation in the stop mode.In the case of a CD-TEXT disc, the track's title is scrolled on the display.÷ Tracks can also be selected by pressing the 4 or ¢ key.÷ Up to 32 tracks can be programmed. When “FULL” is displayed, nomore tracks can be programmed.÷ If you make a mistake, press the CLEAR key and enter the track No.from the beginning.÷ When the 4 or ¢ key is pressed during playback, the track will beskipped in the direction of the pressed button.÷ When the 4 key is pressed once during playback, the play positionreturns to the beginning of the current track being played.Start playback.34 Repeat steps 1, 2 and 3 above.Program desired tracks.21 Select the disc.Go to step 2 within 8 seconds.3 Set the entry.Go to step 3 within 8 seconds.2 Select the desired track No.In the case of a CD-TEXT disc, the disc title is scrolled on the display. (CD-206/DPF-R6010 only)Press the numeric keys as shown below....To enter track No. 25 : 005: Keys and controls used in the operations described on this page.Blinks.Hereafter the illustration of the common partson the front panel is of CD-206/DPF-R6010.P.MODEDISC 1 DISC 2 DISC 3 DISC 4 DISC 54 ¢1 2 34 5 67 8 90 +10P.MODEGP 0M 1 ID CS ?PGM54321GP 0M 1 1D T ON ?. ?5REPEATTRACK NO.DISCNO.54321PGM2 5 P _ 0 11CD-206/DPF-R6010CD-204/203/DPF-R4010/R3010Light up.Track numberCD-204/203/DPF-R4010/R30106Main unit Remote control unitCD-206/DPF-R6010REMOTE CONTROL UNITRC-P0601Downloaded From DvDPlayer-Manual.com Kenwood Manuals