13Usage of Radio Data System (RDS)RDS is a broadcast system in which FM stations transmit useful information along with the actualbroadcast signal. These can be extracted from the normal transmit signal and used for a number ofadditional functions. If an RDS signal is received, after some time the station name will be displayedinstead of the frequency, and radio text will be displayed in the bottom line of the display (if support-ed by the station).RDS functionsThe following information can be retrieved by repeatedly pressing the key:• PTY (Program Type) - If no PTY signal is sent from the station, “[No PTY]” will be displayed.• Frequency - If no RDS signal is received, “[No Name]” appears.• Time - If no time signal is sent by the transmitter, “00:00:00” will appear.• Date - If no date signal is sent by the station, “01-01-2018” appears.In the case of insufficient reception conditions, the reception of the signals may be interrupted or notpossible.Storing stations in the preset memoryTo store FM stations for easier retrieval, 20 memory slots are available. 4 memory presets can beselected via direct selection buttons.1. Storing on the direct selection buttons 1 - 4:• Select a station to save• Keep the corresponding number key pressed until “Preset X Stored” appears in the display.• Stored stations can be called up by briefly pressing the direct selection buttons.2. Assignment of the memory locations 5 - 20:• Select a station to save• Briefly press and hold the <*> button until “Preset Store” appears.• Select a memory location with uII> .• Press the knob to complete the storage. “Preset X Stored” appears in the display.• Stored stations can be called up using the or buttons.Menu functions FMThe key opens a menu in which you can set various functions for FM. Use theuII> knob to scroll through the menu. The following functions are adjustable:• Scan setting: This allows you to set which stations are to be considered when searching for auto-matic storage. Possible settings are “All stations” or “Strong stations only”. Use theuII> knob to select and confirm.• SYSTEM: Settings for sleep timer, alarm clock, time, lighting, language and factory settings