9Setting the display illuminationThe display illumination can be programmed in 3 brightness levels. The following settings can bemade in the “Backlight” menu:“On level”: Brightness of the display when the radio is switched on.Choices: “High” / “Medium” / “Low”“Dim level”: Brightness adjustment for operation and standby.Choices: “High” / “Medium” / “Low”“Timeout”: Time until the display is adjusted to the lighting level in the "Dim setting".Choices: “On / 10 sec / 20 sec / 30 sec / 45 sec / 60 sec / 90 sec / 120 sec / 180 sec”“On” means that the radio always stays in the brightness level of the “On Level”.For adjustment, please proceed as follows:1. Turn on the radio and use the button to select the FM source.2. Press the , button, select the „System“ menu using uII> and thenpress the knob.3. Use uII> knob to select the “Backlight” menu and then confirm.4. Select the functions in the individual "On Level" / "Dim Level” / "Timeout” menus andconfirm with the uII> knob.Setting the sleep timerThe sleep timer is used to automatically turn off the radio after a preset period of time.For adjustment, please proceed as follows:1. Turn on the radio and confirm with the button to select the FM source.2. Press the , button, select the „System“ menu using uII> and thenpress the knob.3. Select the “Sleep” menu with uII> and then confirm.4. In the following menu please choose from the following options: “Sleep off”/”15, 30, 45, 60,90 minutes”.Confirm with the uII> knob.5. The display shows „Sxx“ in the middle line on the right, where “xx” stands for the remaining timeuntil the radio is switched off. If you would like to deactivate the sleep timer, please select the timesetting “Off”.""