Kenwood CS-5230 Service Manual

Also see for CS-5230: Instruction manual

SPECIFICATIONSType150mmrectangulartubewithanintegralgraticuleAccelerationvoltageApprox.12kVEffective area 8 X 10 divisions (1 division = 10 mm)VERTICAL AXIS (COMMON TO CHANNELS 1 AND 2)Sensitivity (+10to+85°C);1mV,2 mV/div:+5%,5mVto5V/div:43%Attenuation1-2-5steps,12ranges,finecontrolbetweenrangesInputimpedance1MQ +2%,approx.25pF5mV to 5V/div DC: DC to 40 MHzAC : 5Hz to 40 MHzDC: DC to 20MHz, AC: 5Hz to 20MHzFrequencyresponse(-3 dB)(+10 to +35°C)Rise time(+10 to +35°C)SignaldelaytimeTheleadingedgemay bechecked usingasquarewave oftherise timeless than thatof thismodel.Crosstalk -40 dB or less (at 1 kHz)A\Maximum input voltage 500 Vp-p or 250 V (DC+AC peak, 1 kHz or less)VERTICAL AXIS (CH3)Sensitivity (+10 to +385°C) 0.1 V/div: =3%InV to 2mV/div5mV to 5V/div Approx. 8.8 nsImV to 2mV/div Approx. 17.5 nsInput impedance IMQ + 2%, approx. 25 pFFre c sponse (-3 dBeroapency rgsnayse C8 a) DC to 40 MiiRise time (+10 to +35°C) Approx. 8.8 nsSignal delay time The leading edge may be checked using a square wave of therise time less than that of this model.A\Maximum input voltage 100 Vp-p or 50 V (DC+AC peak, 1 kHz or less)OperationSingletrace:CHl, CH2,CH3orADDsingletraceoperationMulti-trace:2to4tracesofCH1, CH2,CH3 andADDALT/CHOP: Display by selecting ALT and CHOPADD : Composite waveform of CHI and CH2 signals aredisplayed.