Kenwood DDX374BT Instruction Manual

ENGLISH 37OTHER EXTERNAL COMPONENTSOTHER EXTERNAL COMPONENTSUsing rear view camera• To connect a rear view camera, see page 66.• To use a rear view camera, a REVERSE leadconnection is required. (Page 64)❏ Settings for the rear view camera1 Display the settings screen.On the Home screen:2 Display the screen.3[ON] Displays the picture from the rear viewcamera when you shift the gear to thereverse (R) position.[OFF] Select this when no camera isconnected.❏ Displaying the rear view camera screenThe rear view screen is displayed when you shift thegear to the reverse (R) position.• To remove the caution message, touch the screen.To display the picture from the connectedcamera manuallyOn the pop-up short-cut menu (Page 10):Display the pop-up short-cut menu by pressingMENU on the monitor panel, then select [Camera].On the monitor panel:DDX374BTDDX340BT/DDX24BT(Hold)To exit the camera screenOn the camera screen:Touch the area shown below.On the monitor panel:DDX374BTDDX340BT/DDX24BT(Hold)To adjust the pictureWhile the camera screen is displayed...• The picture adjustment menu is displayed.(Page 52)To close the picture adjustment menu, touch thesame area again.