Kenwood DDX374BT Instruction Manual

ENGLISH 63CONNECTION/INSTALLATIONCONNECTION/INSTALLATION❏ Installation procedure1 To prevent a short circuit, remove the keyfrom the ignition and disconnect the ·battery.2 Make the proper input and output wireconnections for each unit.3 Connect the speaker wires of the wiringharness.4 Connect the wiring harness wires in thefollowing order: ground, battery, ignition.5 Connect the wiring harness connector tothe unit.6 Install the unit in your car.• Make sure that the unit is installed securelyin place. If the unit is unstable, it maymalfunction (eg, the sound may skip).7 Reconnect the · battery.8 Press the reset button. (Page 3)9 Configure . (Page 4)Installing the unit❏ Installing the unit• Bend the tabs of the mounting sleeve with ascrewdriver or similar utensil and attach it in place.❏ Installing the unit using the mountingbracket removed from the carCar Bracket5 or 65 or 6• Select the appropriate type of screw for themounting bracket: flat head (5) or round head(6).❏ Installing the trim plate1 Attach the trim plate (2).2