| 
iPod/iPhoneiPod/iPhone2 Select a category (1), then select adesired item (2).iPodPlaylistsArtistAlbumSongsArtist 000000001Artist 000000002Artist 000000003Artist 000000004Artist 000000005PodcastsSelect an item in each layer until you reach andselect the desired file.• Available categories differ depending on the typeof iPod/iPhone.Settings for iPod/iPhone playback1 Display the screen.On the source control screen, touch as follows:2 Make the settings.ArtworkiPod ModeON OFF• ON (Initial): Shows the artworks of the playingfiles.• OFF: Hides the artworks of the playing files.Listening to the radioPlayback information on the source controlscreenRadio1 Selects the band (AM/FM1/FM2/FM3)2 Text information• Touching [<] scrolls the text if not all of the textis shown.• Touching [Radio Text] switches the informationbetween Radio Text, Radio Text Plus and PTYcode.3 Current station frequency4 Displays the preset stations window (Page 18)5 [P1] – [P5]• (Touch) Selects a preset station.• (Hold) Presets the current station.6 Displays/hides other available operation keys*7 TI indicator8 ST/MONO indicator9 Seek mode indicatorp Operation keys** See the following “Operation keys on source control screen”.RadioRadioOperation keys on source control screen• The appearance of the operation keys may differ,however the similar operation keys have the sameoperations.• See also “Common operation keys on source controlscreen” on page 8.Touching the operation keys performs the followingactions:6[AME ]* (Hold) Presets stations automatically.[MONO]* Activates monaural mode for better FMreception (stereo effect will be lost).• The MONO indicator lights up whilemonaural mode is activated.• To deactivate, touch [MONO] again.[TI]* (For FM RBDS features)Activates TI standby reception mode.• When TI is activated, the unit is readyto switch to traffic information ifavailable. The TI indicator lights up inwhite.• If the TI indicator lights up in orange,tune into another station providingRadio Broadcast Data System signals.• The volume adjustment for TrafficInformation is automaticallymemorized. The next time the unitswitches to Traffic Information, thevolume is set to the memorized level.• To deactivate, touch [TI] again.17ENGLISH |
