Kenwood DDX395 Instruction Manual

Also see for DDX418BT: Instruction manual

Bluetooth®Bluetooth®Selecting an audio file from the menu1 Display the audio menu.On the source control screen, touch as follows:2 Select a category (1), then select adesired item (2).Artist 1BT AudioArtist 2Artist 3Artist 4Artist 5BT AudioPlaylistsArtistAlbumSongsGenreSelect an item in each layer until you reach andselect the desired file.Bluetooth settingsYou can change various settings for using Bluetoothdevices on the screen.1 Display the screen.On the Home screen, touch as follows:Then, on the screen, touch as follows:[System] A : [Enter]2 Make the settings.Bluetooth SetupPaired Device ListPIN CodeDevice NameDevice AddressAuto ConnectEnter0000Bluetooth HF/AudioDDX3eX01:20:03:40:05:60:07ON OFFFront Only AllDisplay the list of registered devices. You canconnect a device or delete registered devices.Change the PIN code of the unit.Show the device name of this unit tobe shown on the Bluetooth device —“DDX3eX”/“DDX3”/“DDX4”.Show the device address of the unit.• ON (Initial): Automatically establishes aconnection with the last connected Bluetoothdevice when the unit is turned on.• OFF: Cancels.Select the speakers used for Bluetooth mobilephones and Bluetooth audio players.• Front Only: Front speakers only.• All (Initial): All speakers.• ON: The unit answers the incoming callsautomatically in 5 seconds.• OFF (Initial): The unit does not answer the callsautomatically. Answer the calls manually.• ON (Initial): Establishes pairing automaticallywith the Android or iOS device (such as iPhone)connected via USB. (Auto pairing may not workfor some devices depending on the Android/iOSversion.)• OFF: Cancels.Touch and hold [Enter] to reset all settings youhave made for using Bluetooth mobile phones andBluetooth audio players.39ENGLISH