42SETTINGSSETTINGSSetting menu itemsRDisplaying the menu screen•You cannot change the screen when [STANDBY] is selected on the.(page7)•You can change the in the setting only when [STANDBY] isselected on the .(page7)RFader: Adjust the front and rear speaker outputbalance.•F6toR6(Initial:0)– When using a two-speaker system, set the faderto the center (0).Balance: Adjust the left and right speaker outputbalance.•L6toR6(Initial:0)Press [J]/[K]/[H]/[I] or drag[]to adjust.– To clear the adjustment, press[Center].Change the sound mode or adjust and store theequalization for each source. (Page36)•Natural(Initial)/Rock/Pops/Easy/Top40/Jazz/UserYou can activate/deactivate loudness.•ON(Initial): Boost low and high frequencies toproduce a well-balanced sound at a low volumelevel. The LOUD indicator lights up.•OFF: Cancels.Adjust the crossover frequency. (Page37)< Volume Offset>Adjust and store the auto-adjustment volume levelfor each source. (For discs, the adjustment is storedfor each of the following categories: DVD /VCD, CD,and DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC.) Thevolume level will automatically increase or decreasewhen you change the source.–15to+6(Initial:0 )•ON(Initial): Activates the subwoofer.•OFF: Deactivates the subwoofer.Select the size of the connected speaker.•Standard(Initial)/Narrow/Middle/Wide
