Kenwood DDX5016DAB Instruction Manual

38BLUETOOTHBLUETOOTHPairing a Bluetooth device from this unit using aPIN code (for Bluetooth 2.0)1 Display the screen.(Page 37)23 Search for the available devices.• To cancel searching for devices, press[Cancel].4 Select the device you want to pair.The pairing request message is displayed on thescreen. Accept the request.• If a PIN code is required, enter “0000” (initial).❏ Connecting/disconnecting a registeredBluetooth deviceTwo devices can be connected simultaneously.1 Display the screen.(Page 37)23 Select the device you want to connect (1),then press [Connection] (2).4 Select [ON] or [OFF] for the target.: Mobile phone: Audio device• The status is shown as follows:– “Connected”: A connection has beenestablished.– “Connect Ready”: A connection can beestablished.– “Disconnected”: No connection isestablished.• Press [Change] for to displaythe screen to configuresettings for applications of iPod/iPhone/Android. (Page 44)• When a Bluetooth mobile phone is connected,the signal strength and battery level are displayedwhen the information is acquired from the device.❏ Deleting a registered Bluetooth device1 Display the screen.(Page 37)23 Select a device to delete (1), then press[Remove] (2).A confirmation message appears. Press [Yes].