English 45Hands Free Unit ControlBefore Use• To use the Phonebook, it must be downloaded to thisunit in advance. For details, see Phonbook> (page 45).For DNX5220BT :• You need to register your cell-phone before using it withthis unit. For more details, see Unit> (page 73).• If you have registered two or more cell-phones, you needto select one of them. For more details, see Unit Connection> (page 75).For DNX5220/DDX5022/DDX5022Y/DDX52RY :• You need to register your cell-phone to your BluetoothUnit beforehand. Make sure to read the instructionmanual of the Bluetooth Unit as well.Downloading the PhonebookDownloads the phonebook data from thecell-phone to this unit so that you can use thePhonebook of this unit.1 By operating the cell-phone, send thephonebook data to this unit.2 By operating the cell-phone, start thehands-free connection.⁄• For the cell-phones which support auto-download ofphonebook:If the phonebook is not downloaded automatically forsome reasons, follow the procedure above to downloadmanually.• For how to operate the cell-phone, refer to theInstruction Manual that comes with your cell-phone.• Up to 1000 phone numbers can be registered for eachregistered cell-phone.• Up to 32 digits can be registered for each phone numberalong with up to 40 characters representing a name.• Depending on the type of your cell-phone, the followingrestrictions are placed:- The phonebook data cannot be downloaded normally.Various functions can be used in the Hands Free control mode.For DNX5220/DDX5022/DDX5022Y/DDX52RY, Bluetooth unit KCA-BT200 (optional accessory) is necessary.- Characters in the Phonebook are garbled.- The phonebook data cannot be downloaded normallyif it contains images. It may take several hours to a fullday to download the phone book depending on thetotal image size.• To cancel downloading of the phonebook data, operatethe cell-phone.Control Screen FunctionDisplaying the control screen and using variousfunctions.1 Display the Hands-Free Control screenPress the [FNC] button for more than 1 second.or[TEL] button on the "Source Select" screenNext page 3
