Kenwood DDX5022 Instruction Manual

Also see for DDX5022: Service manual Product information Installation manual Service manual

Contents

Kenwood DDX5022 Instruction Manual Manual pdf 82 page image

82 DNX5220BT/DNX5220/DDX5022/DDX5022Y/DDX52RYRemote ControllerFor DDX5022Y/DDX52RY : This unit can be operated using the Remote Controller supplied with this unit.For DNX5220BT/DNX5220/DDX5022 : Optional Remote Controller KNA-RCDV330 is designed for controllingthis unit.¤• Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation couldresult, if the Remote Controller falls down and gets wedged under the pedals while driving.• Do not place the battery near an open flame or heat source. This may cause the battery to explode.• Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leakfluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.• Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult aphysician.Battery installationUse two "AAA"/"R03"-size batteries.Insert the batteries with the + and – poles alignedproperly, following the illustration inside the case.⁄• If the Remote Controller operates only over shorterdistances or does not operate at all, it is possible thatthe batteries are depleted. In such instances, replace theboth batteries with new ones.Remote Controller mode switchThe functions operated from the remotecontroller differ depending on the position of themode switch.RETURNDVDT VNAVIAUDPOSITIONOCANCEL••••DVD modeSwitch to this mode when playingDVDs or CDs etc. with the playerintegrated in this unit.AUD modeSwitch to this mode whencontrolling a selected source ortuner source, etc.NAVI modeSwitch to this mode whencontrolling Navigation unit.TV modeSwitch to this mode whencontrolling TV.⁄• The position of the remote control mode switch isindicated in the title of each mode, e.g., "(AUD mode)".• When controlling a player that is not integrated in theunit, select "AUD" mode.