Kenwood DDX6017 Instruction Manual

Also see for DDX6017: Installation manual Instruction manual

Contents

Setup MenuDisplaying the AV I/F 1 screenAV I/F 1 screenAV I / F S e t Up1 Returns to the Control screen of the previoussource.2 Calls the Sound Effects Menu. (see page 78)3 Calls the Setup Menu.4 Selects a navigation system connection. ( RGB)"RGB" Allows the Kenwood’s Navigation Systemto connect via its interface cable."AV-IN": Allows a third-party navigation system toconnect via the AV INPUT port."OFF" Must be used if no navigation system isconnected. (The navigation display iscancelled when the AV source is switched.)5 Sets a name to be displayed when you select asystem that is connected via the AV INPUT port.( VIDEO)If you have set the navigation system connection to"AV-IN", the display is fixed to "NAV".6 Sets an image display of the system that isconnected via the AV INPUT port. ( Normal)"Normal" When the image source is switched, animage entered via the AV INPUT port isdisplayed."AUTO": When an image signal is entered via theAV INPUT port, this image is displayed.7 Sets how the rear camera image is displayed."Reverse": Displays with left and right reversed."Normal": Displays as it is."R-CAM View" can be set only when "AV-IN Name"is set to "R-CAM".8 Displays the AV I/F 2 screen.If is not shown,touch or to display it.AV I / F S e t UpEnglish66 EnglishAV InterfaceYou can set audio and visual (AV) interface parameters.MenuAV I / F 1Nor ma lV I DEOAV - I NNAVAV - I N NameAV - I NNor ma lR-CAM ViewSRCAudioSet Up14 47855632