REVERSEPRK SWREMOTE CONTSTEERING WHEELREMOTE INPUTP.CONTMUTEANT CONT1FRONT VIEW CAMERAVIDEO OUTREAR VIEW CAMERAAV-IN70CONNECTION/INSTALLATIONConnection❏ Connecting wires to terminals15 A fuseConnect to the vehicle’sparking brake detectionswitch harness.• For best safety, be sureto connect the parkingsensor.Purple with white stripe (Reverse sensor wire)Light green (Parking sensor wire)Blue with white stripe (Power/aerial control wire)Light blue with yellow stripe (Steering remote controlwire)If no connections are made, do not let the cable come out from the tab.Connect the antenna cordto the antenna terminal.Connect the USB extension cable(4). (Page 71)Connect GPS antenna (5). (Page 73)Page 72Page 72*Page 73 Page 72Page 72*Page 72*Page 72* Only for DDX8016DABS.Pin Color and functions of Connector AA4 Yellow BatteryA5 Blue/White Power controlA6 Orange/White DimmerA7 Red Ignition (ACC)A8 Black Ground connectionPin Color and functions of Connector BB1/B2 Purple ‘ / Purple/Black “ Right speaker (rear)B3/B4 Gray ‘ / Gray/Black “ Right speaker (front)B5/B6 White ‘ / White/Black “ Left speaker (front)B7/B8 Green ‘ / Green/Black “ Left speaker (rear)Connecting the ISO connectors on someVW/Audi or Opel (Vauxhall) automobilesYou may need to modify the wiring of thesupplied wiring harness as illustrated below.Brown (Mute control wire)Connector AConnector BYellow (Battery wire)Red (Ignition wire)Red (A7)Yellow (A4)To the power control terminal when using the optional power amplifier or to the aerial controlterminal in the vehicle.To the terminal that is grounded when either the telephone rings or during conversation. (Toconnect the Kenwood navigation system, consult your navigation manual.)To use the steering wheel remote control feature, you need an exclusive remote adapter (notsupplied) matching your car is required.Connect to the vehicle’s reverse lamp harness when using the optional rear view camera.Page 72*Page 72Red(Ignition wire)UnitYellow(Battery wire)VehicleRed (A7)Yellow (A4)Default wiring