Kenwood DDX9903S Instruction Manual

Contents

64SETTINGS❏ Using the sound equalization• The adjustment is memorized for each source untilyou adjust the sound again. If the source is a disc,the adjustment is stored for each of the followingcategories.– DVD-Video– CD/VCD/Audio files/Video files (Page 85)• You cannot adjust the sound when the unit is instandby.Selecting a preset sound mode1 Display the

screen. (Page 63)2 Display the screen.• You can also display the screen by touching [ ] on the sourcecontrol screen.3 Display the preset sound modes (1), thenselect a sound mode (2).• Touch [ ] to hide the preset sound modes.Storing your own adjustments—Adjusting thesound precisely1 Display the screen.(See the left column.)2 Select a band and adjust the level of theselected band.• You can adjust the level by dragging the slideror using [J]/[K].• Repeat this step to adjust the level of otherbands.3 Activate ([ON]) or deactivate ([OFF]) thebass () (1), and then adjustthe subwoofer level ()* (2).• Touch [H]/[I] to adjust .• When is set to [ON], a frequencylower than 62.5 Hz is set to the same gainlevel as 62.5 Hz.4 Store the adjustment.A user selection window appears. Select from[User 1] to [User 4] to store your adjustment,then touch [Close] to close the window.• To apply the adjusted equalizer to all playbacksource, touch [ALL SRC] on the Equalizer> screen, then touch [OK] to confirm.• To make the current EQ curve flat, touch[Initialize].* Not adjustable when is selected for subwoofer on the screen. (Page 63)