Kenwood DM-S500 Instruction Manual

Also see for DM-S500: Service manual

Contents

DM-S500 (En)25To pause recordingPlay the CD player.4 ÷ To record music with a margin from the beginning, it is recommendedto start the CD playback after the time display of the MD recorded hasstarted the count.During CD recording, the track number is sometimes incremented by 1 when the CD starts to be played. This is causedby a signal contained in the digital signal components recorded on the CD. Unnecessary track numbers can be deletedby referring to “Erasing several tracks at a time (QUICK ERASE)” or “Erasing a single track during playback (TRACKERASE)”. fl°To stop recording÷ Press the key again to resume recording. At this time, the track numberis incremented by “1”.÷ Recording can also be started by pressing the ¶ key.After recording, eject the Mini Disc.(Main unit only)While “WRITING” is displayed, do not apply shockor vibration to the unit because information is beingwritten on the Mini Disc.N O D I S CWRITING EJECTInformation isbeing written.Mini Disc has been ejected.5NoteNoteNote: Keys and control used in the operations described on this page.(−dB)0 0 1 RL∞ 3 0130 10 5MONITORIn regard to the MONITOR key÷ When the sampling frequency of the digital input signal is not 48 kHz,44.1 kHz, or 32 kHz, “UNLOCK” will be displayed and no sound will beheard.“MONITOR” LightsThe sound of commercial digital equipment (BS tuner, DAT, etc.) connected to DIGITAL 2 can be monitored. However, when this unit is used as ageneral single component, the input source (sound) selected by REC INPUT can be heard.Operate in stopped condition.ENTER ENTER8 7MONITOR ModeMonitorENTERENTERRecording0RC operation GRC operation RC operation GRC operationRC operation GRC operation