Kenwood DM-S500 Instruction Manual

Also see for DM-S500: Service manual

Contents

DM-S500 (En)7Note on connection of optical-fiber cableSYSTEM CONTROL OPERATIONSRemote ControlLets you operate this unit with the system remote control unit (GRC-151, GRC-102 or GRC-101).Automatic OperationAutomatically switches the input selector on the AV CONTROL CENTER or receiver when you start playback from this unit.Synchronized RecordingLets you synchronize recording with the start of playback when recording from CD.See the operating instructions supplied with your CD player or VIDEO-CD LD player for details.SYSTEM CONTROL CONNECTIONSAfter hooking this unit up with the KENWOOD System “SERIES 21,” connect the system control cords for convenient system controloperations between the connected devices.When hooking this unit up with the System “SERIES 21,” read the instruction manuals supplied with the AV CONTROL CENTER (soldseparately) or the receiver (sold separately).NotesNotes1. Do not connect system control cords to any components other thanthose specified by KENWOOD. It may cause a malfunction anddamage your equipment.2. Be sure the system control plugs are inserted all the way in to thesystem control terminals.System connectionsThe optical-fiber cable is designed for use in the connection of theCD player. The digital signal transmission makes it possible torecord the high-quality sound of CDs without degradation.÷ Insert the optical-fiber cable straight into the connector until it clicks.÷ Be sure to attach the protection cap when the connector is not used.÷ Never bend or bundle the optical-fiber cable.