Kenwood DMX120BT Instruction Manual

18Controlling AudioControlling General Audio1 Press the <8MENU> button.2 Touch [Setup].3 Touch [Audio].4 Touch [Sound Effect].5 Touch [ ].6 Set each item as follows.Fader[ ] [ ]Adjust the front and rear volume balance.12 (front) to -12 (rear)Balance[ ] [ ]Adjust the left and right volume balance.12 (right) to -12 (left)[Reset] To clear the adjustment.Ñ Loudness1 Press the <8MENU> button.2 Touch [Setup].3 Touch [Audio].4 Touch [Loudness].Sets the amounts of boost of low and high tones.“ON”, “OFF” (Default)Equalizer Control1 Press the <8MENU> button.2 Touch [Setup].3 Touch [Audio].4 Touch [Sound Effect].5 Set each item as follows.1321 You can select frequency bar and adjust its level.(-7 to +7)• The adjustments are stored and “User” is activated.2 To recall the preset equalizer curve.3 The “User” preset and the current EQ curve returnsto flat.Subwoofer settings1 Press the <8MENU> button.2 Touch [Setup].3 Touch [Audio].4 Touch [Subwoofer].5 Set each item as follows.Frequency[80Hz], [120Hz],[160Hz], [OFF]Low Pass Filter adjustment. /[OFF]: Turns off the subwooferoutput. (Default OFF)Volume[–], [+]Adjusts the subwoofer level. 0 to 12(Default 6)Controlling Audio