Kenwood DMX120BT Instruction Manual

23English |InstallationFRONTREARAV-INLLLRRRVOUTANTCAMV15A5V=1AMICSUBWOOFERPARKINGBRAKEREVERSEGEARSIGNALSTEERINGWHEELREMOTECONTROL2 4 6 81 3 5 72 4 6 81 3 5 7Connect to thevehicle’s parkingbrake detectionswitch harness.For best safety, besure to connect theparking sensor.Light Green(Parking sensor wire)Accessory 5 Extension cablePurple/White(Reverse sensor wire)Accessory 4:Bluetooth MicrophoneTo steering remoteTo use the steering wheel remote controlfeature, you need an exclusive remoteadapter (not supplied) matched to your car.Connect to vehicle’s reverse lamp harnesswhen using the optional rear view camera.Light Blue/Yellow(Steering remote control wire)Fuse (15A)Ñ Wiring harness connector function guidePin Color and functionA-4 Yellow BatteryA-5 Blue/White[3] Power ControlA-7 Red Ignition (ACC)A-8 Black Earth (Ground) ConnectionB-1/ B-2 Purple (+) / Purple/Black (–) Rear RightB-3/ B-4 Gray (+) / Gray/Black (–) Front RightB-5/ B-6 White (+) / White/Black (–) Front LeftB-7/ B-8 Green (+) / Green/Black (–) Rear Left• Speaker Impedance: 4-8 Ω! CAUTIONBefore you connect the commercially available ISOconnectors to the unit, check the following condition:• Make sure that the pin assignment of the connectormatches with the KENWOOD unit.• Take extra notice of the power wire.• In case battery wire and ignition wire are notcorresponding then change them accordingly.• In case the car does not have an ignition wire, use acommercially available interface.Ñ Connecting wires to terminalsSubwoofer PreoutCapCapFM/AM antenna inputFM/AM antennaConnector AConnector BUSB device[2]USB terminal[1] (0.8 m)[1] USB maximum power supply current : DC 5 V = 1 A[2] Sold separately[3] Max. 300mA, 12VISO Connector Rear Audio Preout(Left; White, Right; Red)AV-IN audio input(Left; White, Right; Red)Front Audio Preout(Left; White, Right; Red)Visual Output (Yellow)Rear view camera input (Yellow)AV-IN visual input (Yellow)