Kenwood DMX5020DABSCTKAU01KIT Instruction Manual

Also see for DMX5020DABS: Quick start guide

Setting Up36User Interface SetupYou can setup user interface parameters.1 Press the [MENU] button.hh MENU screen appears.2 Touch [ ].hh SETUP screen appears.3 Touch [User Interface].hh User Interface screen appears.4 Set each item as follows.■ [Beep]Turns the key touch tone on or off.Default is “[OFF]”.■ [Language]Selects a language.■ [Steering Remote Controller]Sets the desired function in the steeringremote controller. See Learning function ofsteering remote (P.36).■ [Time Format]Select the time display format."[12-Hour]"/ "[24-Hour]" (Default)■ [Clock Adjust]Adjust the date and time manually. (P.6)Ñ Learning function of steeringremoteThis function is available only when your vehicleis equipped with the electrical steering remotecontroller.If your steering remote controller is notcompliant, learning may not be completed anderror message may appear.1 Touch [Steering Remote Controller] inthe User Interface screen.hh Steering Remote Controller screenappears.2 Touch the function you want to set.3 Press and hold the steering remotecontroller button.4 Repeat steps 2 and 3 as necessary.5 Touch [ ].NOTE• When changing the function already learned,select the function from the function list in step2 and then press and hold the button you wantto change.• Confirm the contents of the settable function onthe function list. You cannot edit the functionlist.