Controlling Audio42■ Tweeter (Only for Front)You can set the tweeter when you areselecting front speakers.None, Small, Medium, Large■ X’overDisplays the speaker crossover setup screen.You can adjust the crossover setup that wasset automatically when you selected thespeaker type.For details, see Crossover network setup(P.42)Ñ Crossover network setupYou can set a crossover frequency of speakers.1 Touch [Xover ].2 Touch the speaker to set.3 Set each item as follows.■ HPF FREQHigh Pass Filter adjustment. (When front orrear speaker is selected on Speaker Selectscreen)■ LPF FREQLow Pass Filter adjustment. (When subwooferis selected on Speaker Select screen)■ Slope*1Sets a crossover slope.■ GainAdjusts the front speaker, rear speaker, orsubwoofer level.■ TW (Tweeter) Gain *2Adjusts the tweeter level. (When front isselected on Speaker Select screen)■ Phase Inversion*3Sets the phase of subwoofer output.Check [Phase Inversion] to shift the phase180 degrees. (When subwoofer is selectedon Speaker Select screen)*1 Only when “LPF FREQ”/“HPF FREQ” is set toa mode other than “Through” in [Xover ].*2 Only when “Tweeter” is set to “Small”,“Medium”, “Large” in [Speaker Setup].*3 Only when “Subwoofer” is set to a modeother than “None” in [Speaker Setup].Controlling General Audio1 Press the [MENU] button.hh Popup menu appears.2 Touch [Audio].hh Audio screen appears.3 Touch [Fader / Balance].4 Set each item as follows.■ Fader / BalanceAdjust the volume balance around thetouched area.[C] and [D] adjust the right and left volumebalance.[R] and [S] adjust the front and rear volumebalance.■ [Center]Clear the adjustment.