Kenwood DMX7018DABS Instruction Manual

Contents

Controlling Audio43EnglishEqualizer ControlYou can adjust equalizer by selecting theoptimized setting for each category.1 Press the [MENU] button.hh Popup menu appears.2 Touch [Audio].hh Audio screen appears.3 Touch [Equalizer].4 Touch the screen and set the GraphicEqualizer as desired.■ Gain level (dotted frame area)Adjust the gain level by touching the eachfrequency bar.You can select frequency bar and adjust itslevel by [R], [S].■ Preset SelectDisplays the screen to recall the presetequalizer curve.■ MemorySaves the adjusted equalizer curve from“User1” to “User4”.■ InitializeThe current EQ curve returns to flat.■ ALL SRCApply the adjusted equalizer to all sources.Touch [ALL SRC] and then touch [OK] on theconfirmation screen.■ Bass EXT (Bass Extend Settings)When turned on, the frequency lower than62.5 Hz is set to the same gain level as 62.5Hz.■ SW LevelAdjusts the subwoofer volume. This settingis not available when subwoofer is set to“None”. See Speaker/ X’over setup (P.41).Ñ Recall the EQ curve1 Touch [Preset Select].2 Select EQ curve.NOTE• [iPod] is available only during iPod source.Ñ Save the EQ curve1 Adjust the EQ curve.2 Touch [Memory].3 Select where to save.