Kenwood DMX8021DABS Instruction Manual

Also see for DMX8021DABS: Quick start guide

Connection/Installation79EnglishÑ Connecting the system andexternal components897135143151661011142121 Accessory 4: Microphone2 Dashboard camera interfaceConnect a Dashboard Camera DRV-N520(optional accessory). (P.81)3 When connecting to an external amplifier,connect its ground wire to the car’s chassis toavoid damaging the unit.Rear Audio Preout(Left; White, Right; Red)Front Audio Preout(Left; White, Right; Red)Subwoofer Preout(Left; White, Right; Red)4 FM/AM antenna input5 AV-IN (for audio) input (ø3.5 mini jack)6 VIDEO Input (Yellow)Connect a RCA cable (sold separately) to VIDEOinput terminal to use AV-IN (for visual) or Side(Left or Right) view camera Input (Yellow).For more information, see To set up thecamera assignment settings (P.53).7 Front view camera/Dashboard camerainput (Yellow). See To set up the cameraassignment settings (P.53).8 Rear view camera input (Yellow)9 3rd view camera input (Yellow). See To set upthe camera assignment settings (P.53).10 Digital Radio antenna CX-DAB1 (Optionalaccessory)!Use of a CX-DAB1(optional accessory) as aDigital Radio antenna is recommended.When using a commercially available DigitalRadio antenna, the diameter of the SMBconnector must be Φ6.5 mm or less.Φ 6.5 mm (maximum)11 Connect to vehicle’s steering remote harness.Contact your KENWOOD dealer for details.12 Accessory 7: GPS AntennaUse the supplied GPS antenna. Using the GPSantenna other than the supplied one maycause a drop in positioning accuracy.13 Visual Output (Yellow)14 External I/F15 USB terminal (USB Type-C®)16 HDMI input (Type-D)Connect a KCA-HD200 (optional accessory) toHDMI input terminal.W: 11.1 mm or lessH: 7.7 mm or lessD: 21.5 mm or lessWH DInstallation/removal of fixing bracketWhen you connect the cable to HDMI terminaland USB terminal, remove the fixture. Afterconnecting the cable, put the fixture again.FixtureUSB cableHDMI cable