Kenwood DMX820WXS Instruction Manual

Controlling Audio38Controlling AudioNOTICE• Each operation in this section can be startedfrom the multi function menu.You can adjust the various settings such asaudio balance or subwoofer level.1 Press the [MENU] button.hh Popup menu appears.2 Touch [Audio].See the following section for eachsetting.• Set up speaker/ X’over (P.38)• Controlling equalizer (P.40)• Set listening position/ DTA (P.42)• Controlling general audio (Fader /Balance) (P.39)• Set volume offset (P.41)• Set sound effect (P.41)Speaker/ X’over setup1 Press the [MENU] button.hh Popup menu appears.2 Touch [Audio].hh Audio screen appears.3 Touch [Speaker/Xover ].4 Select a car type.You can setup the car type and speakernetwork, etc.If your car type is selected, the Delay TimeAlignment is set automatically (for timingadjustment of sound output for eachchannel) to have the highest surroundeffects.5 Touch the speaker (1) you wish to adjustand set each item (2) as follows.12■ SpeakerYou can select a speaker type and its size toget the best sound effects.When the speaker type and size are set,the speaker crossover network is setautomatically.■ Location (Only for Front, Rear)Select the speaker position you have fixed.