56 DNX5260BT/DDX5026/DDX5056Equalizer ControlYou can set up the equalizer.Display the Equalizer screen1Touch [ ] > [ ] > [Equalizer]. (page 55)Set each item2[SystemQ] Selects an equalizer curve type.You can select any of the following equalizercurves."Natural"/ "Rock"/ "Pop"/ "Easy"/ "Top40"/"Jazz"/ "User"⁄"User":•Your own tone curve can be created. See Setup> (page 56).[SystemQ-EX] Selects items to be adjusted fortone curve setup.If selected "OFF", only Level can be set up fortone curves.[Tone] Displays the Tone curve setup screen.(page 56)Tone SetupYou can set a Tone curve.Display the Equalizer screen1Touch [ ] > [ ] > [Equalizer]. (page 55)Display the Tone Control screen2Set the Tone3[Bass] Bass adjustment items are displayed.[Middle] Middle adjustment items aredisplayed.[Treble] Treble adjustment items are displayed.[Flat] Tone level becomes 0 (flat).[FREQ] Sets the Center frequency.[Level] Sets the level.[Q Factor] Sets the Q factor. (Only [Bass] and[Middle] can be set)[Bass DC EXT] Bass DC Extend settings. (Only[Bass] can be set)If turned "ON", it extends the bass centerfrequency to the low register by approximately20%.[SW Level] Adjusts the subwoofer volume.The setting is available when subwoofer is setto "ON". See (page 72).Audio Control
