Kenwood DNX7190HD Instruction Manual

Also see for DNX5060EX: Instruction manual Quick start guide Quick start guide

Contents

9494 95Return to the Top pageAudio Setting UpReturn to the Top pageAudio Setting UpNOTE• Each operation in this section can be started fromthe multi function menu.You can adjust the various settings such asaudio balance or subwoofer level.1 Touch [Menu] on any screen.2 Touch [Audio].Audio screen appears.See the following section for each setting.• Setting audio (P.94)• Controlling audio (P.98)• Controlling equalizer (P.99)• Performing zone control (P.101)• Set space enhancer (P.101)• Set listening position (P.102)Setting Audio1 Touch [Audio SETUP].Audio SETUP screen appears.See the following section for each setting.• Set up speakers (P.94)• Set up your car type (P.96)• Select DSP (P.97)• Set up elevation (P.97)Speaker Select screen appears.• Set up speakers (P.94)Speaker setupYou can select a speaker type and its size toget the best sound effects.When the speaker type and size are set,the speaker crossover network is setautomatically.1 Touch [Speaker Select] in the AudioSETUP screen.Speaker Select screen appears.2 Touch the speaker you wish to adjustand set each item as follows.Controlling Audio SubwooferSelect if you are using a subwoofer.TweeterYou can set the tweeter when you areselecting front speakers.If you are using a tweeter together with thefront speakers, set the tweeter to “ON”.X’overDisplays the speaker crossover setup screen.You can adjust the crossover setup that was setautomatically when you selected the speakertype.For details, see Crossover network setup (P.95)3 Select a speaker size using [2] and[3]. The speaker size is differentdepending on the speaker type andthe unit.FrontOEM, 4 inch, 5 inch, 6-1/2 inch, 6-3/4 inch,4-3/4 inch, 3-1/2 inch, 7 inch, 4x6, 5x7, 6x8,6x9, 7x10RearNone, OEM, 4 inch, 5 inch, 6-1/2 inch, 6-3/4inch, 4-3/4 inch, 3-1/2 inch, 7 inch, 4x6, 5x7,6x8, 6x9, 7x10SubwooferNone, 6 1/2 inch, 8 inch, 10 inch, 12 inch, 15inch overNOTE• Select “None” if you have no speakers.FrontStandard, Wide, Middle, NarrowCrossover network setupYou can set a crossover frequency ofspeakers.1 Touch the speaker to set the crossoverin the Speaker Select screen.2 Touch [X’over].X’over screen appears.3 Set each item as follows.Phase*Sets the phase of subwoofer output.The phase is reversed 180 degrees when set to“Reverse”.HPF FREQHigh Pass Filter adjustment. (When front or rearspeaker is selected on Speaker Select screen)LPF FREQLow Pass Filter adjustment. (When subwooferis selected on Speaker Select screen)SlopeSets a crossover slope.* This function is available in the specificsituation.Only when “Subwoofer” is set toother than “None” in “Speaker Setup”.Only when “Subwoofer” isset to “ON” in “Speaker Setup” and “LPFFREQ” is set to other than “Through”.