| 
English 15Switches the video sourceThe video source switches in the following order each time you press the button.Built-in Disc PlayerTVVideoiPodRear View CameraNavigationYou can also turn off the video display by pressing the button longer than 1 second.When you press the button again, the previous video display comes back on.⁄• You cannot switch to a source that is not connected or inserted.• The Rear view camera video is displayed when the vehicle's gear is in "Reverse".• Turn "On" the "Navigation Source" of the (page70) to display the Navigation video.DPlaying a USB deviceWhen connecting a USB device, playback starts automatically.Removing the USB devicePress on the USB control screen to enter the USB suspend mode, and then remove the USBdevice. Refer to (page 39).¤• Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device.⁄• If the USB source is selected when a USB device is not connected, "No Device" is displayed.• When the playback is stopped and then restarted, the playback will start from the point where it was stopped at the lasttime. Even if the USB is removed and connected again, the playback will start from the last stopped point unless thecontents in the USB device is changed.• Make sure that the USB device is connected firmly. |
