Kenwood DNX7380BT Instruction Manual

Also see for DNX5380: Service manual Quick start quide Instruction manual

Contents

5050Return to the Top pageRadio, TVTraffic Information (FM tuner only)You can listen and watch the trafficinformation automatically when a trafficbulletin starts.However, this feature requires a Radio DataSystem that includes the TI information.1 Touch [ ] in the control screen.The multi function menu appears.2 Touch [TI] in the multi function menu.Traffic information mode is set.When the traffic bulletin startsThe Traffic Information screen appearsautomatically.NOTE• It is necessary to have Traffic Information functionset to on in order to have the Traffic Informationscreen appear automatically.• The volume setting during reception of trafficinformation is automatically stored. The next timethe traffic information is received, this unit recallsthe volume setting automatically.Frequency Step SettingChange the tuning frequency step. Theoriginal setting is 50 kHz for FM band, and 9kHz for AM band.This function is available for models withregion code 4 or 6.1 While pressing

buttonand <0> button, press button.While pressing volume knoband <0> button, press button.2 Release your fingers from the buttonsafter the display appears.The frequency step changes to 200 kHzfor FM band, and 10 kHz for AM band.Tuner SetupYou can set tuner related parameters.This function is available for models withregion code 2 or 3.1 Touch [ ] in the control screen.Multi function menu appears.2 Touch [SETUP] in the multi functionmenu.SETUP Menu screen appears.3 Touch [Source].Source SETUP Menu screen appears.4 Touch [TUNER SETUP] in the list.TUNER SETUP screen appears.