Kenwood DNX775RVS Instruction Manual

USB/microSD34USB/microSDConnecting a USB device1 Connect the USB device with the USBcable. (P.89)2 Press the [HOME] button.3 Touch .4 Touch [USB]. (P.13)Ñ Disconnect the USB device1 Press the [HOME] button.2 Touch a source other than [USB].3 Detach the USB device.Ñ Usable USB deviceYou can use a mass-storage-class USB device onthis unit.The word “USB device” appearing in this manualindicates a flash memory device.● About file systemThe file system should be the one of thefollowing.• FAT16 • FAT32 • exFAT • NTFSNOTE• Install the USB device in the place where it willnot affect safe driving.• You cannot connect a USB device via a USB huband Multi Card Reader.• Take backups of the audio files used with thisunit. The files can be erased depending on theoperating conditions of the USB device.We shall have no compensation for any damagearising from any erased data.Inserting the microSD1 Press the [G] button.2 Touch [OPEN] to the panel fully opens.3 Insert the SD card into the slot until itclicks.4 Press the [G] button.5 Press the [HOME] button.6 Touch .7 Touch [SD]. (P.13)Ñ Remove the microSD1 Press the [G] button.2 Touch [OPEN] to the panel fully opens.3 Push the SD card until it clicks and thenremove your finger from the card. Thecard pops up so that you can pull it outwith your fingers.4 Press the [G] button.Ñ Usable SD card.The unit is capable of playback of microSD/microSDHC/ microSDXC memory cardscomplying with the SD, SDHC or SDXC standard.