Kenwood DNX775RVS Instruction Manual

Setting Up71English2 Follow the instruction on the screen andlong touch the center of each [ ].12NOTE• To cancel the touch panel adjustment, touch[Cancel].• To reset to the initial status, touch [Reset].Special SetupYou can setup Special parameters.1 Press the [MENU] button.hh Popup menu appears.2 Touch [SETUP].hh SETUP screen appears.3 Touch [Special].hh Special screen appears.4 Set each item as follows.■ [DEMO]Set the demonstration mode. Default is “ON”.■ [SETUP Memory]Locks or unlocks the Audio SETUP Memory/Recall/Clear.■ [Audio SETUP Memory]Memorizes the current audio setting.• Fader/ Balance, Speaker / X’over, Equalizer(User Preset, SW Level), Position/DTA,Sound Effect (P.74)■ [Audio SETUP Recall]Recalls the memorized audio setting.■ [Audio SETUP Clear]Clears the AUDIO SETUP Memory and thecurrently memorized audio setting.■ [Software Information]Check the software version of this unit.(P.71)■ [Open Source Licenses]Displays the open source licenses.■ [Initialize]Touch [Initialize] and then touch [Yes] to setall the settings to the initial default settings.• Audio SETUP Memory is not initialized.Ñ Software InformationCheck the software version of this unit.1 Touch [Software Information] in theSpecial screen.2 Confirm the software version.NOTE• For how to update the software, see the relevantupdate procedure manual which comes with thesoftware.Display Setup1 Press the [MENU] button.hh Popup menu appears.2 Touch [SETUP].hh SETUP screen appears.3 Touch [Display].hh Display screen appears.