Kenwood DNX893S Quick Start Manual

Also see for DNX5160BTS: Instruction manual Quick start guide Instruction manual Instruction manual

26InstallationÑ Removing the unit (DNX893S, DNX7160BTS,DNX693S, DNX5160BTS)1) Remove the trim plate by referring to step 1 in “Removingthe trim plate”.2) Insert the two extraction key (accessory 4) deeply into theslots on each side, as shown.43) Lower the extraction key toward the bottom, and pull outthe unit halfway while pressing towards the inside.✎ NOTE• Be careful to avoid injury from the catch pins on theextraction key.4) Pull the unit all the way out with your hands, being carefulnot to drop it.Ñ Connecting the system and external componentsAV IN 132168 791012114 5Visual Output (Yellow)Rear view camera input(Yellow)Front view camera input(Yellow)1 iDatalink connector(DNX893S/ DNX773S/ DNX693S/ DNX573S only)2 AV Audio output (ø3.5 mini jack)3 FM/AM antenna input4 When connecting to an external amplifier, connect itsground wire to the car’s chassis to avoid damaging theunit.Rear Audio Preout (Left; White, Right; Red)Front Audio Preout (Left; White, Right; Red)Subwoofer Preout (Left; White, Right; Red)5 Accessory =: Steering remote harness(DNX7160BTS/ DNX5160BTS only)Connect to vehicle’s steering remote harness. Contactyour KENWOOD dealer for details.6 SiriusXM Connect Vehicle Tuner connector(DNX893S/ DNX773S/ DNX693S/ DNX573S only)7 AV-IN (CA-C3AV; Optional Accessory) input(AV-IN2: DNX7160BTS/ DNX5160BTS)8 Accessory 0: GPS Antenna9 Accessory 3: Bluetooth Microphonep HDMI/MHL inputMHL maximum power supply current : 5 V = 900 mAWhen you connect the cable to HDMI/MHL terminal,remove the fixture. After connecting the cable, put thefixture again.HDMI/ MHL connectorFixtureq AV-IN1 input (Visual; Yellow, Left audio; White, Rightaudio; Red)(DNX7160BTS/ DNX5160BTS only)w TV tuner remote output(DNX7160BTS/ DNX5160BTS only)