Kenwood DNX9280BT Instruction Manual

Also see for DNX9280BT: Instruction manual Voice command table Quick start guide

Contents

62 DNX9280BTZone ControlYou can set the front and rear audio source.1 Display the Zone Control screenTouch [ ] > [ ] > [Zone Control]. (page 60)2 Set the Zone Control[Single Zone] Sets the unit to single zone.[Dual Zone] Sets the unit to dual zone.[Front Source] Sets the front audio source.[Rear Source] Sets the rear audio source.⁄• When the rear speaker sound is switched, the audiosource that is output at the AV OUTPUT terminal isalso switched to the same source.[Rear VOL.] Adjusts the volume of the rearchannel.⁄• There are following limitations when zone function isset to "ON".- There is no output from the subwoofer and centerspeaker.- "Subwoofer Level", and "Supreme" of

(page 60) is not available.- (page 61), (page 62), WOW Control> (page 63), and Control> (page 64) are not available.- (page 65), (page 66), and (page 67) are notavailable.Listening PositionYou can adjust the sound effects according to yourlistening position.1 Display the Position screenTouch [ ] > [ ] > [Position]. (page 60)2 Set the Position Control[P1] - [P3] Stores the present adjustment setupin memory, or recalls it from memory.To store your adjustment in memory:Continue to touch [P1] to [P3] more than 2seconds.To call your adjustment from memory:Touch [P1] to [P3] of your adjustment you wishto recall from memory.[2], [3] Sets a listening position.You can select any of "Front R" (Right front),"Front L" (Left front), "Front All" (All front), "All"(All), and "User" (User) positions.[DTA] Displays the Position DTA (Digital TimeAlignment) screen.3 Exit Position Control⁄• The final distance is adjusted to the total of Car TypeSet Up value (page 66) and Position Setup (both Positionand Position DTA) value.• If you change the Car Type Set Up value (page 66), theposition is set to "All".• Only the adjusted distance of position setup (Positionand Position DTA values) is stored in memory. Therefore,the final adjustment distance changes if you changethe Car Type Set Up value (page 66).Audio Control