64 DNX9280BTAudio ControlSurround ControlYou can set up the sound field.1 Display the Surround Control screenTouch [ ] > [ ] > [Surround Control].(page 60)2 Set the Surround Control11 Sets a sound field.You can select any of the following sound fields."Bypass"/ "Bypass+Center"/ "Dolby Pro Logic IIMovie"/ "Dolby Pro Logic II Music"/ "Dolby ProLogic II Matrix"[Stream Information] Displays the presentsource information.The stream (Dolby Digital, dts, Linear PCM, MPEG,SDDS, AAC or MP3/WMA), input channels (frontor rear channels), and sampling frequency aredisplayed.⁄• When you have selected the TV or TUNER sourceand when you set the Dolby PL, we recommend youto select the "Dolby PLII Matrix" mode. If you selectanother Dolby PLII mode, the sound is NOT outputfrom rear speakers when you receive monauralbroadcasting sounds.• Surround control can be set for each source.• You can set the sound field when playback of a 2channel (2/0) source.Dolby Pro Logic II Music Adjustment1 Display the Dolby Pro Logic II Music Adjustscreen2 Adjust the sound field[Dimension Control] Sets the surround positionby adjusting the front and rear volume balance.[Center Width Control] Sets the vocal imageposition by adjusting the right and left vocalvolume level.[Panorama Mode] Turns the Panorama modeOn or Off.⁄• You cannot use the during playback of a Multi-channel source.
