Kenwood DNX996XR Quick Start Manual

Also see for DNX996XR: Instruction manual Instruction manual

USB/SD/iPod18USB/SD/iPodConnecting a USB device1 Connect the USB device with the USBcable. (P.33)Ñ Disconnect the USB device1 Press the [HOME]/[ ] button.2 Touch a source other than [USB].3 Detach the USB device.Ñ Usable USB deviceYou can use a mass-storage-class USB devicewith this unit.The word “USB device” appearing in this manualindicates a flash memory device.Inserting the SDDNX996XR1 Press the [G] button.2 Touch [OPEN] to the panel fully opens.3 Insert the SD card into the slot until itclicks.4 Press the [G] button.DNR876S1 Press and hold the [CAM] button.2 Touch [OPEN] to the panel fully opens.3 Insert the SD card into the slot until itclicks.4 Press and hold the [CAM] button.DNX696S / DNX576S / DNR46EX /DNR476S1 Insert the microSD card into the slot untilit clicks.Ñ Remove the SD cardDNX996XR1 Press the [G] button.2 Touch [OPEN] to the panel fully opens.3 Push the SD card until it clicks and thenremove your finger from the card. Thecard pops up so that you can pull it outwith your fingers.4 Press the [G] button.DNR876S1 Press and hold the [CAM] button.2 Touch [OPEN] to the panel fully opens.3 Push the SD card until it clicks and thenremove your finger from the card. Thecard pops up so that you can pull it outwith your fingers.4 Press and hold the [CAM] button.DNX696S / DNX576S / DNR46EX /DNR476SPush the microSD card until it clicks and thenremove your finger from the card. The cardpops up so that you can pull it out with yourfingers.