Kenwood DNX996XR Quick Start Manual

Also see for DNX996XR: Instruction manual Instruction manual

Basic Operations8Initial SettingsInitial setupPerform this setup when you use this unit firsttime.1 Set each item as follows.■ [Locale]Select the country for the navigation system.The language, the distance unit, and thegasoline unit are set.1 Touch [Locale].2 Select the desired country.■ [Language]Select the language used for the controlscreen and setting items. Default is “AmericanEnglish(en)”.1 Touch [Language].2 Touch [Language Select].3 Select the desired language.4 Touch [ ].For details, see User Interface Setup(P.90) in the Instruction Manual.■ [Display]Set the key illumination color.If it is hard to see the image on the screeneven, adjust the viewing angle.1 Touch [Display].2 Touch [Key Color].3 Select the desired color.4 Touch [ ].(DNX996XR / DNR876S only)5 Touch [Display Adjustment].6 Adjust a viewing angle and a tilt position.7 Touch [ ].(DNX696S / DNX576S / DNR46EX / DNR476Sonly)5 Touch [Viewing Angle].6 Select a viewing angle.7 Touch [ ].Viewing AngleYou can adjust the viewing angle when theimage on the screen is difficult to see evenly.The smaller the (negative) value, the morewhitish the image on the screen looks. "0"(Default)/"-1"/"-2"/"-3"For details, see Display Setup (P.92) inthe Instruction Manual.■ [Camera]Set the parameters for the camera.1 Touch [Camera].2 Set each item and touch [ ].For details, see Camera Setup (P.84) inthe Instruction Manual.■ [OEM SETUP]This function requires a commercial adaptor.Consult your KENWOOD dealer for details.■ [DEMO]Set the demonstration mode. Default is “ON”.2 Touch [Finish].NOTE• These settings can be made from the SETUPmenu. See Setup (P.89) in the InstructionManual.