Kenwood DPF-1030 Instruction Manual

Also see for DPF-1030: Service manual Service manual

8SYSTEMCONTROLSYSTEMCONTROLSYSTEMCONTROLSYSTEMCONTROLSYSTEMCONTROLNotesNotesSYSTEM CONTROL CONNECTIONSConnecting system control cords after connecting a KENWOODaudio component system lets you take advantage of convenientsystem control operations.This unit is compatible only with the [SL16] mode. The system con-trol operation is not available if the unit is connected in the [XS-8]connection mode.÷ Do this operation after completing all connections.(Ensure that the unit is set to POWER OFF.)1. If your amplifier or receiver does not have a system control terminal,do not connect any system control cords to the system control termi-nals on the other components.2. Do not connect system control cords to any components other thanthose specified by Kenwood. It may cause a malfunction and damageyour equipment.3. Be sure the system control plugs are inserted all the way in to thesystem control terminals.SYSTEM CONTROL OPERATIONSRemote ControlLets you operate this unit with the system remote control unit supplied with the amplifier or receiver.Automatic OperationAutomatically switches the input selector on the amplifier or receiver when you start playback from this unit.Synchronized RecordingLets you synchronize recording with the start of playback when recording from CD. Also, the simple CCRS operation lets you make great recordingsfrom CD.See the operating instructions supplied with your cassette deck and MD recorder for details.System connections