Kenwood DPX-3070 Instruction Manual

Also see for DPX-3070: Service manual

Kenwood DPX-3070 Instruction Manual Manual pdf 10 page image

10 | EnglishGeneral featuresAudio Control1 Enter the Audio Control modePress the [AUD] button for at least 1 second."AUD mode" is displayed.2 Select the Audio item for adjustmentPress the [FM+] or [AM–] button.Each time the button is pressed, the items thatcan be adjusted switch as shown below.3 Adjust the Audio itemPress the [4] or [¢] button.Adjustment ItemAdjustment ItemAdjustment Item DisplayDisplayDisplayDisplay RangeRangeRangeBalance "BAL" Left 15 — Right 15Left 15 — Right 15Fader "FAD" Rear 15 — Front 15Sub woofer level*¹ "SubW" –15 — +15Bass boost level*² "AmpB""AmpB" Flat/+6/ +12/ +18 (dB)Central frequency boostCentral frequency boost*² "AmpF""AmpF" Normal/ LowLow Pass Filter*¹ "LPF" Through/120/80/50 HzThrough/120/80/50 HzVolume offset "V-OFF" –8 — ±0• *¹ You can control this item when 'Subwoofer Output'(page 10) is set to "SubW On".• Volume offset: Each source’s volume can be set as adifference from the basic volume.• *² - Refer to the catalog or instruction manual forpower amplifiers that can be controlled from thisunit.- For amplifiers there are the model that can be setfrom Flat to +18 dB, and the model that can be setfrom Flat to +12 dB.When an amplifier that can only be set to +12 isconnected to the unit, "AmpB +18" won't workcorrectly even if it's selected.4 Exit the Audio Control modePress the [AUD] button.Subwoofer OutputTurning the Subwoofer output ON or OFF.Press the [AM–] button for at least 1 second.Each time the button is pressed Subwooferoutput switches ON or OFF.When it’s ON, "SubW On" is displayed.• You can control this function when 'Switching preout'(page 24) is set to "SWPRE SW".SRS WOW SelectYou can play back adding gorgeous heavy bass tothe sound and making a 3D sound field.1 Enter the WOW Select modePress the [WOW] button."WOW SEL" is displayed.2 Select the WOW itemPress the [WOW] button.Each time the button is pressed, the SRS WOWSelect switch as shown below:SRS WOW DisplayDisplayDisplayDisplayMoves the sound image up a notch and adjustsbass and the sound field. "Low"Moves the sound image up two notches andadjusts bass and the sound field. "High"Changes to the value set in 'SRS WOW Control'.Changes to the value set in 'SRS WOW Control'. "User"Returns to the normal sound without SRS WOW. "Off"• When operation stops for 3 seconds, the SRS WOWSelect closes.• WOW: TruBass, FOCUS and SRS 3D are all set to valuesshown below.SRS WOW SRS FOCUS SRS TruBass SRS 3DHighHigh HighHigh On OnLow Low On OnOff Off Off OffTEL MuteThe audio system automatically mutes when acall comes in.When a call comes in"CALL" is displayed.The audio system pauses.Listening to the audio during a callPress the [SRC] button.The "CALL" display disappears and the audiosystem comes back ON.When the call endsHang up the phone.The "CALL" display disappears and the audiosystem comes back ON.