Kenwood DPX-3070 Instruction Manual

Also see for DPX-3070: Service manual

Kenwood DPX-3070 Instruction Manual Manual pdf 31 page image

English | 31InstallationWhen performing a check of the CD operation priorto installation, place this unit in a horizontal positionand perform a loading/eject of the CD.When a ground wire is included in the wiring kit (whichis sold separately), fasten the ground wire with thebinding screw located on the rear panel of this unit.Accessory3(M5 × 6 mm)or Accessory4(M5 × 7 mm) Accessory2(Only for NISSAN car)Screw (M4× 8)(commercially available)InstallationInstall onto the car bracket using the suppliedscrews (M5 × 6 mm, M5 × 7 mm). The holes of thecar bracket to use will differ depending on the carmodel.• During installation, do not use any screws except forthose provided. The use of different screws might resultin damage to the main unit.• Damage may occur if a screwdriver or similar tool is usedwith excessive force during the installations.