Kenwood DPX-5000BT Instruction Manual

Also see for DPX-5000BT: Instruction manual

Contents

Kenwood DPX-5000BT Instruction Manual Manual pdf 6 page image

6Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the followingtable), then press the knob.3 Repeat step 2 until the desired item is selected or activated.4 Press and hold to exit.To return to the previous setting item, press .Default: XXTUNER SETTINGLOCAL SEEK ON: Searches only AM/ SW1/ SW2 stations with goodreception. ; OFF: Cancels.• Settings made are applicable only to the selected source/station. Once you change the source/station, you need tomake the settings again.AUTO MEMORY YES: Automatically starts memorizing 6 stations with goodreception. ; NO: Cancels.• Selectable only if [NORMAL] is selected for[PRESET TYPE]. ( 5)MONO SET ON: Improves the FM reception, but the stereo effect may belost. ; OFF: Cancels.NEWS SET ON: The unit will temporarily switch to News Programme ifavailable. ; OFF: Cancels.REGIONAL ON: Switches to another station only in the specific regionusing the “AF” control. ; OFF: Cancels.AF SET ON: Automatically searches for another station broadcastingthe same program in the same Radio Data System networkwith better reception when the current reception is poor. ;OFF: Cancels.RADIOSearch for a station1 Press repeatedly to select TUNER.2 Press repeatedly (or press on RC-406) to selectFM1/ FM2/ FM3/ AM/ SW1/ SW2.3 Press (or press on RC-406) to search for a station.• To change the searching method for : Press repeatedly.AUTO1 : Automatically search for a station.AUTO2 : Search for a preset station.MANUAL : Manually search for a station.• To store a station: Press and hold one of the number buttons (1 to 6).• To select a stored station: Press one of the number buttons (1 to 6) (or pressone of the number buttons (1 to 6) on RC-406).Direct Access Tuning (using RC-406)1 Press DIRECT to enter Direct Access Tuning.2 Press the number buttons to enter a frequency.3 Press to search for a station.• To cancel, press or DIRECT.• If no operation is done for 10 seconds after step 2, Direct Access Tuning isautomatically canceled.