Kenwood DPX-6020 Instruction Manual

Kenwood DPX-6020 Instruction Manual Manual pdf 7 page image

This function allows you to turn down the volume quickly.Turning Attenuator On/Off:Press the ATT button to switch the attenuator on and off.When the attenuator is on, the ATT indicator blinks.When the attenuator is off, the volume returns to the originallevel.Turning the volume all the way down deactivates the attenuatorfunction.NOTEAttenuatorIncreasing Volume:Press the 5 button to turn up the volume.Decreasing Volume:Press the ∞ button to turn down the volume.Volume— 7 —Adjust the clock.When the clock is not displayed, first press the DISP button todisplay "Clock".Press the DISP button for at least two seconds to enter theclock adjustment mode.• Adjusting the hoursPress the FM button to advance the hours, or press the AMbutton to make the hours go back.• Adjusting the minutesPress the ¢ button to advance the minutes, or press the4 button to make the minutes go back.Press the DISP button to end the clock adjustment mode.4321Adjusting ClockAdjust various sound levels.Press the AUD button twice to enter the control mode.Press either the 4 or ¢ button.Each time the button is pressed, the adjustment mode willchange as follows:Pressing the ¢ button advances the display, and pressing the4 button reverses it.Press the FM/AM button.Look at the table to adjust the mode being displayed.Press the AUD button to end the control mode.4Adjustmentmode(Display)Balance("Balance")Fader("Fader")Non-FadingPreout Level("N-F")Left channel emphasized.Rear channel emphasized.Right channel emphasized.Front channel emphasized.AM button FM buttonOperation of Audio control buttonNon-fading soundemphasized.Non-fading soundreduced.3"Balance""Fader" "N-F" (only when being switched)21Audio Control Setting