Kenwood DPX-8030MD Instruction Manual

Also see for DPX-8030MD: Service manual

This function reproduces many different virtual sound fields.1 Enter the DSP control modePress the [DSP] button."DSP CONTROL MODE" is displayed.2 Selecting the sound field settingPress the [DSP] button.Each time the button is pressed the sound field setting switchesas shown below.Sound Field SettingTurning the DSP effects ON or OFF.A DSP is a device which uses digital control to correct the audiosignal and produce sound effects that can compensate for thesmall passenger compartment of a vehicle.Turn DSP System ONPress the [DSP] button."DSP CONTROL MODE" is displayed.Turn DSP System OFFPress the [DSP] button for at least 1 second."DSP OFF" is displayed.DSP(Digital Signal Processor) SystemNon-Fading level cannot be preset into the memory.— 17 —Setting DisplayStadium "STADIUM"Concert Hall "CONCERT"Club Disco "CLUB DISCO"Church "CHURCH"Listening "LISTENING"Bypass "BYPASS"When operation stops for 10 seconds, the Sound Field Settingcloses.Recall the preset equalizer curve classified in groups.1 Enter the Equalizer control modePress the [EQ] button."EQ CONTROL MODE" is displayed.2 Select an equalizer curvePress the [EQ] button.Each time the button is pressed the preset equalizer curveswitches.Setting DisplayFlat "Flat"Rock "Rock"Pops "Pops"Dance "Dance"Vocal "Vocal"When Equalizer Curve is adjusted, the selection starts from "User".Ending of Equalizer control modePress the [EQ] button for at least 1 second.When operation stops for 10 seconds, the Equalizer controlmode closes.Preset Equalizer Curve Selection