Kenwood DPX-8030MD Instruction Manual

Also see for DPX-8030MD: Service manual

English— 36 —— 36 —–+ILLUMIFM/AM antenna input 1Front left output (White) 23Front right output (Red) 28Fuse (10A)2 KENWOOD disc changer control inputWiring harness(Accessory1)2529White/Black32Gray/Black35Green/Black38Purple/BlackWhite31Gray34Green37Purple40To front leftspeaker 30To front rightspeaker 33To rear rightspeaker 39To rear leftspeaker 36Ignition wire (Red) 20Battery wire (Yellow) 21Ground wire (Black) · (To car chassis) 22Ignition keyswitch10Car fuse box(Main fuse)11ACC 13Car fusebox 14BatteryIf no connections are made, do not let the wire come out from the tab.4Rear left output (White)/Non-fading left output (White)Rear right output (Red) /Non-fading right output(Red)To connect the Disc changer,consult your Disc changermanual. 3Power control wire (Blue/White)Motor antenna control wire (Blue)Dimmer control wire (Orange / White)5 When using the optional power amplifier,connect to its power control terminal.To car light control switch87 Depending on what antenna you are using,connect either to the control terminal of themotor antenna, or to the power terminal forthe booster amplifier of the film-type antenna.Connecting Wires to TerminalsExternal amplifier control wire(Pink / Black)To "EXT.AMP.CONT." terminal of the amplifierhaving the external amp control function.AUX left input (White)AUX right input (Red)