Kenwood DPX-MP4100 Instruction Manual

Kenwood DPX-MP4100 Instruction Manual Manual pdf 10 page image

10 | EnglishGeneral featuresSubwoofer OutputTurning the Subwoofer output ON or OFF.Push the Control knob toward down for at least2 seconds.Each time you push the knob, Subwoofer outputswitches ON and OFF.When it is ON, "SubW ON" is displayed.Switching DisplayChanging the information displayed.Press the [DISP] button.Each time the button is pressed the displayswitches as shown below.In Tuner sourceInformation DisplayFrequencyStation name or Frequency "SNPS"CharacterClockIn CD & External disc sourceInformation DisplayPlay timeDisc name "DNPS"Disc title "D-Title"Track title "T-Title"CharacterClockIn Audio file sourceInformation DisplayPlay timeFolder name "Folder"File name "File"Music title "Title"Album name "Album"CharacterClockIn Tape sourceInformationPlay side & Tape counterCharacterClockIn Auxiliary input sourceInformationAuxiliary input nameCharacterClockIn Standby modeInformationCharacter & GraphicClock & GraphicClock⁄• If the selected display item does not have anyinformation, alternative information is displayed.• Album name cannot be displayed in WMA file.Spectrum Analyzer SelectSelecting the Spectrum Analyzer display.1 Enter the Spectrum Analyzer Select modePress the [S.A] button for at least 1 second."SPANA" is displayed.2 Select the Spectrum AnalyzerPress the [S.A] button.Each time the button is pressed, the SpectrumAnalyzers switch as shown below:Spectrum Analyzer DisplayScan of Spectrum Analyzer "S.A Scan"Peak Hold "PeakHold"Spectrum Analyzer 1 "SPANA 1"……Spectrum Analyzer 7 "SPANA 7"Spectrum Analyzer off "S.A OFF"⁄• Scan of Spectrum Analyzer:The items from "PeakHold" to "SPANA 7" are displayed insequence.3 Exit the Spectrum Analyzer Select modePress the [S.A] button for at least 1 second.When operation stops for 10 seconds, SpectrumAnalyzer at that time is registered and the AnalyzerSelect mode automatically closes.