Kenwood DPX-MP4100 Instruction Manual

Kenwood DPX-MP4100 Instruction Manual Manual pdf 4 page image

4 | English• If you experience problems during installation,consult your Kenwood dealer.• When you purchase optional accessories, check withyour Kenwood dealer to make sure that they workwith your model and in your area.• Characters in the LCD may become difficult to readin temperatures below 5 ˚C (41 ˚F).• The characters conforming to ISO 8859-1 characterset can be displayed.• The illustrations of the display and the panelappearing in this manual are examples used toexplain more clearly how the controls are used.Therefore, what appears on the display in theillustrations may differ from what appears on thedisplay on the actual equipment, and some of theillustrations on the display may be inapplicable.How to reset your unit• If the unit fails to operate properly, press the Resetbutton. The unit returns to factory settings when theReset button is pressed.• Press the reset button if the disc auto changer failsto operate correctly. Normal operation should berestored.Reset buttonCleaning the UnitIf the faceplate of this unit is stained, wipe it with adry soft cloth such as a silicon cloth.If the faceplate is stained badly, wipe the stain off witha cloth moistened with neutral cleaner, then wipe itagain with a clean soft dry cloth.¤• Applying spray cleaner directly to the unit may affect itsmechanical parts. Wiping the faceplate with a hard cloth orusing a volatile liquid such as thinner or alcohol may scratchthe surface or erases characters.About Cassette tapeCleaning the tape headWhen there’s noise or the sound quality is bad duringtape play the tape head maybe dirty, clean the tapehead.About Cassette tape• If the tape is slack tighten it.• If the cassette tape label is peeling off glue it onagain.• Don’t use deformed cassette tape.• Don’t place cassette tape on the dashboard etc.where the temperature is high.• Don’t use cassette tape that’s 100 minutes long orlonger.The marking of products using lasers(Except for some areas)CLASS 1LASER PRODUCTThe label is attached to the chassis/case and saysthat the component uses laser beams that havebeen classified as Class 1. This means that the unit isutilizing laser beams that are of a weaker class. Thereis no danger of hazardous radiation outside the unitNotes