Kenwood DPX-U5130BT Instruction Manual

Also see for DPX-U5130: Service manual

English | 23Listen to the tunerListening to the radioSelecting a tuner sourcePress the [SRC] button to select a “TUNER”.Selecting a bandPress the [1] button.Pressing the button switches the receiving band (FM1,FM2, FM3, MW, SW1, SW2).Selecting a stationPress the [E] or [F] button.The tuning mode can be changed. Refer to (page 23).Station preset memoryYou can store a station in the memory.1 Press the [E] or [F] button to select thechannel.2 Press and hold the button ([1] to [6]) to whichyou want to assign the selected station.“STORED” appears and the station is registered.About the Mix station preset mode• In this mode, different bands and tuner sources can besaved in the same preset layer, which allows you to recallthe desired station without switching between bands ortuner sources.Auto memoryYou can register 6 (FM)/ 6 (AM) stations with goodreception automatically.1 Select the Tuner source.Refer to (page 10).2 Press and hold the [AUDIO] button.Enter the Function setting mode.3 Use the [Control knob] to select “SETTINGS” >“AUTO MEMORY”.For how to use the [Control knob], refer to select the item> (page 9).4 Use the [Control knob] to select “YES”.When 6 (FM)/ 6 (AM) stations that can be receivedare stored in the memory, the process in this modeis completed.Preset tuningRecalling a station from the memory.1 Press the [1] button to select a band.2 Press the button ([1] to [6]) corresponding tothe station you want to listen to.Tuner settingYou can set up the tuner.1 Select the Tuner source.Refer to (page 10).2 Press and hold the [AUDIO] button.Enter the Function setting mode.3 Use the [Control knob] to select “SETTINGS”.For how to use the [Control knob], refer to select the item> (page 9).4 Use the [Control knob] to select a Tunersetting itemDisplay Description“LOCAL SEEK” Only stations whose reception is good are searched inauto seek tuning. (FM only)“ON” / “OFF”“SEEK MODE” Sets the tuning mode.“AUTO1”: Automatic search for a station.“AUTO2”: Search in order of the stations in the presetmemory.“MANUAL”: Normal manual tuning.“MONO SET” You can reduce the noise when stereo broadcasts arereceived as monaural. (FM only)“ON” / “OFF”( : Factory setting)5 Use the [Control knob] to select a setting.The previous item appears.Exit the Function setting mode.Press and hold the [6] button.